G.A.S Enviro AC/EC Controller
Complete controll of every aspect to your grow room, Fans, Heaters, Humidifiers, Dehumidifiers, Pump Timers, Grow Lights
G.A.S Enviro AC/EC Controller Practically takes care of all aspects of your grow room, controls day time and Night Temperature, Day Time and night Timer Humidity, Heaters, Humidifiers, Dehumidifiers, Lighting ( 1200W in total ) timers for irrigation set up. Highly accurate Sensor Measures Temperature and humidity also is a light sensor so it knows when the plants are in lights off period, because of this sensor you can have different humidity and temperature settings for light on and off crucial for indoor growing.
Has 2 External Plugs which can be used programmed to controll Humidifiers, Dehumidifiers, Heaters, Lighting ( 1200w in total over 2 plugs) pump feeds in seconds and minutes
- Can run both AC and EC fans (AC fans up to a maximum of 2200 watts)
- Perfect for use with the Systemair Revolution Vector fan range or Hyper fans
- Operates individual night and day settings for your grow room
- Controls and regulates temperature and humidity levels quickly and accurately
- Large LCD display shows all your current grow room information
- Simple to navigate menu options are easy to setup and refine
- Plug in extra heaters, humidifiers, dehumidifiers or timers using the exit sockets, all controllable from the Enviro Controller
- Can control up to 2 x 600w grow lights for complete lighting and ventilation control
- Comes with long temperature, humidity and light sensor
1 x Enviro Controller from Global Air Supplies
20cm x 9cm
13 Amp total
Power Lead Length:
How the Enviro Controller Works:
Precise Fan Controll Is Crucial for indoor Gardening, in the winter you may want to slow your intake down in the night cycle to allow heaters to heat the room also in the summer when the heatwave hits higher your minimum fan speed or turn the intake off completely if its bringing in too much warm air. Enviro Controller has 3 Sensors built in Light Temperature and humidity allowing each perimeter to be changed to suit your growing room needs.
The Enviro Controller is easy to operate with full controll of every aspect of your grow room, Fans will automatically speed up and slow down according to the temperature set, Exhaust fan will speed up in the night cycle if the humidity peaks higher than what is set, Heaters will turn on if the grow room drops below the desired temperature. Too much intake not a problem the controller can put a balance controll on the intake to create a negative room pressure, irrigation pumps can be plugged in giving you seconds and minutes of irrigation feeds and duration, 2 X 600w grow lights can be plugged in so can humidifiers and dehumidifiers however there is only 2 EXIT plugs so only 2 appliances can be plugged in i.e heater and dehumidifier DO NOT EXCEED 13A
Heaters – these can be set to come on when temperatures drop below certain levels. Unlike a typical thermostatic set-up, you can select different temps for daytime and night-time!
Humidifiers – set your humidifiers to come on whenever moisture levels drop below your chosen levels. Again, this can be set differently for daytime and night-time.
Dehumidifier – works in the same way as the dehumidifier, but in the opposite fashion, switching equipment on as moisture levels rise above your selected daytime or night-time settings.
Timer – you can control any grow room equipment (as long as you don’t exceed 13-amp) down to the second!