Pro-Leaf Co2 Generators

Pro-Leaf Co2 Generators (Liquid Propane) Burners

No Pilot Flame – The intelligent electronic ignition system removes the need for one.

Suspend It Or Stand It – Suspend it using rope ratchets…Stand it up on the expandable metal leg attachments.

Solenoid Valve Attachment – This allows you to turn the CO2 supply off & on. Never get a controller without a solenoid valve – you won’t be able to shut off the gas supply completely.

Tip-Over Safety Switch – There’s also a tip-over switch, which cuts power if the unit isn’t upright.

Minimal Carbon Deposits – To reduce carbon build ups, the brass burners have chrome lined tips.

Even CO2 Dispersion – CO2 is pushed out of both sides of the unit, thanks to the unique ‘V’ shaped internal design.

Why Add CO2?

Plants use CO2 for photosynthesis (sugar production). If CO2 is restricted, so is sugar production.

Plants can handle 1000 – 1200ppm of CO2. There’s only around 400 – 450ppm in the air. That’s less than 1/2 the amount they can use!

Adding CO2 is one of the easiest ways to ramp up sugar production and increases your yield by up to 20%!

In summer, extra CO2 and also helps plants with heat stress by photosynthesising more!

Kit Contains

Gas regulator.

3.66m hose.

Hanging hardware.

Metal feed.

24V power adapter.

Items Needed

LPG Generator (This Product).

Propane cannister (red / orange) – available in most petrol stations or garages.

UK Propane Regulator (Low Pressure) – typically comes with the cannister.

CO2 Controller with co2 sensor / analyser.

Recommended: Hose clamp / gas hose clips, Pipe cutters, Leak detection fluid.

Pro-Leaf Co2 Generator (GEN-LP-4) 4 Burners (if chosen)

Pro-leaf Co2 Generators convert liquid Propane (LP) or natural gas (NG) into supplemental carbon dioxide for accelerated growth.

BBL-4 features four burners, with included burner plugs allowing Co2 output modification.

A full range of safety features ensure reliable operation-electronic ignition replaces an open pilot flame, solenoid valve to restrict gas if the burners do not ignite, and a tip-over switch which cuts power if the unit is not upright.

Integrated LEDs indicate operational status. Each model comes complete with a gas regulator, 3.66m hose, power adapter and hanging hardware.

Pro-Leaf Co2 Generator (GEN-LP-10) 10 Burners (if chosen)

Pro-leaf Co2 Generators convert liquid Propane (LP) or natural gas (NG) into supplemental carbon dioxide for accelerated growth.

BBL-10 features 10 burners with included burner plugs allowing Co2 output modifications.

The 10-burner BBL-10 offers enhanced functionality with convenient selector switches operating two, five , seven, or all 10 burners at a time.

A full range of safety features ensure reliable operation-electronic ignition replaces an open pilot flame, solenoid valve to restrict gas if the burners do not ignite, and a tip-over switch which cuts power if the unit is not upright.

Integrated LEDs indicate operational status. Each model comes complete with a gas regulator, 3.66m hose, power adapter and hanging hardware.